Professional 6-dzm-10 battery 12V 10AH

6-dzm-10 battery Model:6-DZM-10 Nominal voltage:12V Rated capacity:10Ah Dimension:(L*W*H)151*99*95mm

Professional 6-dzm-10 battery 12V 10AH

product advantage

1.maintenance free

2.low self-discharge

3.long life and environmental protection.

4.uniform voltage can be kept among battery

5.no failure with in two year storage

6.quick starting touch-and-go

7.the battery can be freely used in three dimension directions

8.value-regulated, the pressure built-up inside of cells can be release during occasional discharge

9.the battery can be fully recharged even after standing in a discharged stale of zero volt for one month

10.safety: without acid leaked,reliable opening and closing of safe-value prevent damage to equipment and explosion battery

Typical Applications:

1.electric motorcycle

2.electric scooter

3.power tools

4.hybrid vehicle

specification

model	Voltage(V)	2HR Capacity(AH)	L(mm)	W(mm)	H(mm)	TH(mm)	Weight(kg)
3-DZM-6	6	6	151±2	34±1	94±1	100±1	1.3
3-DZM-10	6	10	151±2	50±1	94±1	101±1	2.1
6-DZM-6	12	6	151±2	65±1	94±1	100±1	2.6
6-DZM-10	12	10	151±2	99±1	95±1	101±1	4.0
6-DZM-12	12	12	151±2	99±1	97±1	101±1	4.2
6-DZM-14	12	14	151±2	99±1	116±1	119±1	5.4
6-DZM-17	12	17	181.5±2	77±1	167.5±1	167.5±1	6.2
6-DZM-20	12	20	181.5±2	77±1	167.5±1	167.5±1	6.9
6-DZM-24	12	24	177±2	166.5±1	125±1	125±1	8.8
6-DZM-25	12	25	195±2	130±1	164±1	167±1	11.2
6-DZM-32	12	32	197±2	165±1	170±1	170±1	14.5
6-DZM-18	16	18	250±2	100±1	126±1	126±1	8.8

For our battery end user1. Please choose correct model for your vehicle.2. Check the charge indicator is in green before you buy3. Confirm your car engine charging system with an output voltage between 13.8V to 14V4. If the total power of equipment is higher than the battery design work load, please change to a higher capacity model.

Please noted during charging1.Constant voltage charging: please charge with 16V (maximum 16.2V) keep good ventilation. Reduce charging voltage if battery temperature rise over 45oC or charging current over 25A.2.Constant current charging: please charge with current 0.05C A. 20 Iand can not over this limit. Please stop charging if indicator turn green or open circuit over 12.65V

Something you should know

1. Do not connect and avoid accidentally connection between positive and negative pole with metallic conductor to avoid short circuit

2. Avoid convert connection or unstable connection.

3. Do not fill in unqualified electrolyte or water.

4. Do not operate under insufficient electrolyte condition.Semi maintenance free battery should be fill in pure water regularly.

5. Do not using in deep cycle (capacity lower than 50% electrolyte gravity, below 1.200g/ml).

6. Keep safe vent-valve work properly to avid explosion cause by valve failure.

7. Do not invert or incline more than 45 during transfer or storing.8. Keep ventilation during charging, no smoking.

9. Wear goggle when change or check the battery.

Professional 6-dzm-10 battery 12V 10AH